Accueil Documentation - Article D. Installation Procedures – 2nd Boom Sensor
Welcome to our Support Center
< All Topics

D. Installation Procedures – 2nd Boom Sensor

2nd Boom Sensor

  • Find a suitable location on the 2nd boom, left or right side, to install the 2nd Boom Sensor. You are looking for a spot that is easy to access when installing or removing the sensor day to day.
  • You will want the bracket to be mounted so that the clips on the Sensor are facing down. This makes it easier to remove the sensor.
  • Suitably clean the area with Brake Cleaner and wipe dry. Clean the surface of the boom as well as the back of the mounting bracket with the 3M VHB wipes after completely cleaning the surface. They are not intended to clean but they accelerate setting the glue of the 3M tape. Attach the 3M double sided tape to the bracket and then stick your sensor plate on firmly and press for 30 seconds. The adhesive bond will strengthen over time.




Table of Contents